Acceptance of these terms

By accessing optronicworks.com, you agree to these website terms. If you do not agree, do not use the site. These terms apply to the public website and do not replace a signed quotation, contract, nondisclosure agreement or controlled technical document.

The site is operated for Optronic Works in Shenzhen, Guangdong, China. References to “we”, “us” and “our” mean the site operator. References to “you” mean the person or organisation accessing the site.

If you access the site on behalf of an organisation, you confirm that you have authority to do so. If you do not have that authority, do not submit an inquiry or accept terms on the organisation’s behalf.

Informational purpose

The website describes product families and general engineering methods. It is intended for business and technical audiences. It is not a safety manual, operating procedure, maintenance instruction or export authorisation. A product must not be installed, operated or integrated solely on the basis of a web page.

Product images may show representative configurations. They are not dimensional drawings and may not show the final connector set, mount, lens, finish or labelling. Use the controlled drawing and interface document for integration.

Nothing on the site is advice for a particular legal, regulatory, safety or mission-critical decision. Obtain qualified engineering and compliance review before using a product in an operational system.

No offer or contract

Product descriptions, specifications, catalogue downloads and inquiry forms are invitations to discuss a requirement. They are not a binding offer, price commitment, delivery promise or guarantee of availability. A contract is created only through a written quotation or agreement accepted by authorised representatives.

Prices, lead times, export eligibility, warranty terms and configuration details are determined for the specific project. A page may describe a model that is not available in your jurisdiction or that requires a different configuration for your platform.

If a website statement conflicts with a signed contract or controlled data sheet, the signed document governs. Please confirm the current configuration before relying on any figure for procurement.

Product data and supplier statements

Model-specific values may be supplier-stated and may change with configuration, lens, detector, firmware, mounting or environmental conditions. Detection, recognition and identification ranges depend on target size, contrast, atmosphere and the test method. Power consumption may vary with startup, video mode, heater use and output load.

We aim to describe the context of a figure, but a public page cannot capture every programme variable. You should request current data sheets, drawings, interface control documents and qualification evidence for the proposed model. Acceptance criteria should be agreed in writing.

We do not warrant that every page is free from typographical error or that a supplier will maintain a particular configuration indefinitely. Product availability and specifications may change without notice.

Quotations and orders

A quotation identifies the model, configuration, quantity, commercial terms, validity period and any assumptions. An order is effective only when accepted under the applicable agreement. The customer is responsible for providing accurate platform, interface, destination and end-use information.

Changes requested after quotation may affect price, schedule, compliance review and technical performance. No employee or representative may orally vary a written contract unless the contract permits it.

Delivery, inspection, acceptance, warranty and liability terms are governed by the signed agreement. Website language does not create a warranty or extend a warranty period.

Export control and sanctions

Products, software, technical data and related services may be subject to export-control laws, sanctions, end-use restrictions and destination requirements. Access to this website does not authorise the export, re-export, transfer or release of controlled items or information.

You agree not to use the site or request information in a way that would violate applicable export-control or sanctions requirements. We may request end-user, end-use, destination and programme information before responding to a technical request. We may decline a request where the proposed transaction cannot be supported.

Do not send controlled technical data through the public form, ordinary email or WhatsApp. Ask for an approved secure transfer method and the relevant agreement first.

Acceptable use

You may browse the site, download public documents for internal evaluation and contact us about a legitimate business requirement. You may not attempt to gain unauthorised access, interfere with site availability, introduce malicious code, scrape the site in a way that burdens the service, or use the content to misrepresent an affiliation with Optronic Works.

You may not copy product pages into a competing catalogue, remove attribution, or present our text as independent test evidence. You may not use the site to send unlawful, deceptive, infringing or harmful material.

We may restrict access where we believe these terms or applicable law have been violated.

Intellectual property

The site’s text, layout, graphics, code and original images are protected by applicable intellectual property laws. Product names, model identifiers and third-party marks remain the property of their respective owners. No licence is granted except the limited right to view the site and use public information for a genuine business evaluation.

You may share a link to a public page and quote a short passage with clear attribution. You may not reproduce a substantial part of the site, remove notices, create a derivative product catalogue or use the material in a way that implies endorsement.

If you believe content on the site infringes your rights, contact us with the URL, the material concerned and evidence of your rights.

Disclaimer of warranties

To the extent permitted by law, the website is provided on an “as available” basis. We do not warrant uninterrupted access, completeness, freedom from errors or suitability for a particular purpose. General guidance is not a substitute for project engineering.

Nothing in these terms excludes a warranty or right that cannot be excluded under applicable law. Product warranties, if any, are stated in the applicable contract and are not created by website wording.

Limitation of liability

To the extent permitted by law, we are not liable for indirect, incidental, special or consequential loss arising from use of the public website, reliance on a general article or inability to access the site. This includes loss of profit, loss of opportunity or loss arising from a procurement decision made without confirming the current controlled data.

Nothing in this section limits liability that cannot be limited by law, or liability arising under a separate signed agreement. If you are using the site for a mission-critical application, obtain the appropriate engineering, safety and compliance review.

Applicable law and disputes

These website terms are intended to be governed by the laws applicable to the site operator in Shenzhen, People’s Republic of China, without prejudice to mandatory protections that apply in your jurisdiction. Courts located in Shenzhen are intended to have jurisdiction over disputes concerning the public website, subject to any different dispute clause in a signed agreement.

Before starting formal proceedings, the parties should attempt to resolve a website-related issue through written notice and a reasonable discussion. Project disputes are handled under the applicable contract, not these general website terms.

Changes and contact

We may update these terms to reflect changes in the website, products or legal requirements. The reviewed date at the top of the page will change for material revisions. Continued use after an update means the revised terms apply to subsequent use.

Questions about these terms: sales@optronicworks.com. Location: Shenzhen, Guangdong, China. For content sourcing, see the editorial policy. For data handling, see the privacy policy.

These terms are a public website notice and are not a substitute for legal advice or a negotiated supply agreement.